Command™ Picture Hanging Strips offer a convenient and damage-free solution for decorating your space. They make the process quick and easy, requiring no tools. With a simple click, the strips lock in place, holding your pictures and frames securely. When it's time to move or remove them, the strips come off cleanly, leaving no nail holes, cracked plaster, or sticky residue behind.
How to Apply Command™ Picture Hanging Strips
Wait 7 days after painting before use if you painted
Remove hanging hardware from back of frame
Use indoors 50˚ – 105˚F (10˚ – 40˚C)
DO NOT apply strips to paper or soft surfaces on frame
DO NOT hang over beds or on wallpaper
DO NOT hang valuable or irreplaceable items
*Not adhering to the instructions carefully may result in damage.
Step 1: Wipe wall with rubbing alcohol. Do not use household cleaners or water.
Step 2: Separate strips. Click strips together.
Step 3: Remove one side of liners. Stick on frame. Press firmly.
Step 4: Remove remaining liners. Press frame firmly to wall.
Step 5: To ensure adhesive holds, temporarily remove frame from wall to reinforce strips. Peel frame. Press each strip on wall for 30 sec.
Step 6: Wait 1 hour for adhesive to build. Align strips. Press frame until each pair of strips clicks.
How to Remove Command™ Picture Hanging Strips
Step 1: Grab bottom corners and peel frame from wall. Do not pull straight off.
Step 2: Never pull away from wall. Pull easy-off stretch strips slowly down against the wall at least 15 inches (38 cm) to release.
What surfaces are appropriate for Command™ Picture Hanging Strips?
✓ Painted Walls
✓ Painted/Varnished Wood
✓ Painted Cinder Block or Concrete
✓ Metal
✓ Tile
✓ Smooth Solid Surfaces (Most Plastics, Acrylic, PVC, PE, PP)
✓ Glass
✓ Laminates
Inappropriate:
❌ Textured Walls
❌ Wallpaper
❌ Brick
❌ Other Rough and Non-Stick Surfaces
❌ Fabric
Comments